Install Android 4.4.2 LiquidSmooth v3.0 ROM on Galaxy S4 I9505 [GUIDE]

Galaxy S4 I9505 can now be updated to the latest Android 4.4.2 KitKat firmware, with due credit to the release of LiquidSmooth v3.0 ROM by XDA developers: Liquid0624, Deadman96385, jsnweitzel, Somber73, TheBr0ken, Cdub50 and CPA-Poke.

LiquidSmooth is an aftermarket firmware based on the original Android Open Source Project (AOSP). It is focused at offering smooth, stable and faster ROMs in a lightweight and modified AOSP base package with custom features for latest Android 4.4.2 KitKat update.

The LiquidSmooth v 3.0 ROM brings a host of intuitive features to AOSP stock firmware such as Slims DPI, custom animation controls, Active Display, Slims QuickSettings, Halo (renamed to bubble in settings), Privacy Guard and Lockscreen Notifications.

Check out the complete list of features ported into this ROM on the XDA Developers website (check source link below).

Interested Galaxy S4 I9505 users can go ahead and install the LiquidSmooth ROM on their phones by following our step-by-step guide provided below. IBTimes UK reminds its readers that it will not be held liable for any damage to device during or after firmware installation. Users are advised to proceed at their own risk.

Pre-requisites

• The LiquidSmooth ROM and the instructions given in this guide are meant for the Galaxy S4 GT-I9505 model only. Verify device model number by navigating to Settings > About Phone.
• Back up data and settings using a recommended custom recovery tool, like ClockworkMod (CWM) or TWRP, as it creates a complete image of the existing phone setup. In Recovery, choose Backup and Restore and tap Backup.
• Verify correct USB drivers for the phone are installed on the computer (download Galaxy S4 GT-I9505 USB drivers).
• Ensure USB debugging mode is enabled on the phone, by navigating to Settings > Developer Options (NOTE:Tap the phone's Build Number seven times to unlock or reveal the hidden Developer Options under Settings.) Then select the checkbox to enable USB debugging mode under Settings > Developer Options.
• Make sure the phone has at least 80% battery charge to prevent unexpected device shutdown (due to battery drain) while installing the ROM.
• Ensure the device is unlocked (not locked to a specific carrier) and rooted with latest ClockworkMod (CWM) Recovery (v6.0.4.5 or above) installed. If you are installing the CWM recovery for the first time, check out the video tutorial below, courtesy of The Android Soul:

• If the device is stuck at booting or experiencing boot loop issues, perform Wipe Cache Partition and Wipe Dalvik Cache a few more times before rebooting.
• Allow newly installed ROM to stabilise for five minutes before you start working on it.

Downloads Required

• Android 4.4.2 LiquidSmooth v3.0 ROM
• PA_Gapps for Android 4.4.2 KitKat
• CWM Recovery 6.0.4.6 (Philz touch) (install via Odin v3.0.9)
• TWRP Recovery 2.6.3.1

Steps to Install Android 4.4.2 KitKat Update on Galaxy S4 I9505 with LiquidSmooth v3.0 ROM

Step-1: Download Android 4.4.2 LiquidSmooth ROM for Galaxy S4 I9505 to computer

Step-2: Download Google Apps package

Step-3: Connect the Galaxy S4 to computer via USB cable. Without extracting, copy the downloaded firmware zip and Google Apps zip files to the root folder of the phone's SD card.

The Android 4.4.2 LiquidSmooth ROM can be installed on the Galaxy S4 I9505 using either CWM or TWRP recovery. Follow any method based on the recovery mode installed on your device.

How to Install Android 4.4.2 LiquidSmooth ROM via ClockworkMod (CWM) Recovery

• Power off the phone and wait for 5 to 10 seconds until the device shuts down completely.
• Now press and hold Volume Up, Home and Power buttons together until the Galaxy S4 logo appears on screen and the device boots into Recovery mode. NOTE: In recovery mode, use Volume keys to navigate between options and Power key to select the desired option.
• If installing LiquidSmooth ROM for first time then do steps a) and b) (else if upgrading from previous build, then skip to next step):

a) Perform Wipe data/Factory reset (this will delete all apps and their settings and game progress) and choose Yes on next screen to confirm the action.

b) Return to CWM recovery main menu and select Mounts and Storage> Format / data and click Yes on next screen to confirm.

• From the main menu of CWM recovery, perform Wipe Cache partition. Then go to Advanced and choose Wipe Dalvik Cache. Then hit Yes on next screen to confirm.
• Select Install Zip from sdcard and then click Choose zip from sdcard. Browse to the location of the LiquidSmooth ROM firmware file which you copied earlier to your phone's SD card. Choose Yes on next screen to confirm the ROM installation.
• Repeat the previous step to install Google Apps as well.
• Once Google Apps is also installed, select "Go Back "and reboot the device by tapping reboot system now from the recovery menu. Your Galaxy S4 will restart and it may take about 5 minutes for first boot. So, do not interrupt the process.

Your Galaxy S4 I9505 is now running on Android 4.4.2 KitKat via LiquidSmooth ROM. Go to Settings > About Phone to verify the firmware installed.

NOTE: If the device gets stuck at boot loop (while rebooting), then just do a factory reset from recovery mode to fix the issue.

How to Install Android 4.4.2 LiquidSmooth ROM via TWRP Recovery

• Power off the phone and wait for 5 to 10 seconds until the device shuts down completely.
• Now press and hold Volume Up, Home and Power buttons together, until the device boots into Recovery mode. NOTE: In recovery mode, use Volume keys to navigate between options and Power key to select the desired option.
• Perform Wipe data/Factory reset (this will delete all apps and their settings and game progress). To do so, tap on Wipe and scroll down to the bottom of the screen and do a Swipe on "Swipe to factory reset" option.
• Now perform a System format by selecting Wipe > Advanced Wipe and then tap on System option. Scroll to the bottom of screen and do a swipe on "Swipe to Wipe" option.
• Tap on install and navigate to the LiquidSmooth ROM zip file you copied earlier to your phone's SD card. Scroll to the bottom of screen and do a swipe to confirm the action and begin installing the firmware.
• Repeat the previous step to flash Google apps as well.
• Once Google Apps is also installed, select reboot and then tap on System to reboot your device. Your Galaxy S4 will restart and it may take about 5 minutes for first boot to complete. So, do not interrupt the process.

Your Galaxy S4 I9505 is now running on Android 4.4.2 KitKat via LiquidSmooth ROM. Go to Settings > About Phone to verify the firmware installed.

[Source: XDA]