Update Galaxy S4 LTE with I9505XXUFNC6 Android 4.4.2 KitKat Stock Firmware

The Galaxy S4 LTE has received the latest Android 4.4.2 KitKat build I9505XXUFNC6 with bug-fixes and performance enhancements as part of regular maintenance updates from Samsung.

The update is now being rolled out to the international variant of the Galaxy S4 LTE (GT-I9505) via Over-The-Air (OTA), starting with New Zealand. Galaxy S4 LTE users can also install this update manually via Samsung KIES.

Those who missed the official OTA update notification and those who cannot wait for the official release of the firmware in their country can still install the same manually via Odin, using our step-by-step guide.

Android 4.4.2 I9505XXUFNC6 Firmware Details

Model: GT-I9505

Model name: GALAXY S4 LTE
Country: New Zealand
Version: Android 4.4.2
Changelist: 481100
Build date: Wed, 12 Mar 2014 02:32:27 +0000
Product Code: TNZ

PDA: I9505XXUFNC6

CSC: I9505TNZFNC1
MODEM: I9505XXUFNC6

Note: As this is an unbranded firmware, it can be installed on any unlocked international variant of Galaxy S4 LTE (GT-I9505), regardless of the country or region.

IBTimes UK reminds its readers that it will not be held liable for any damage to device during or after firmware installation. Users are advised to proceed at their own risk.

Pre-requisites

1. Install necessary USB Drivers for Galaxy S4 LTE (GT-I9505) on the computer.

2. USB Debugging Mode should be enabled on the phone by navigating to Settings >> Developer Options.

3. Back up your important data to avoid potential data loss during firmware installation.

4. Ensure the phone is factory unlocked (not locked to any specific carrier).

5. Verify Galaxy S4 LTE has at least 80 percent battery charge.

6. The Android 4.4.2 I9505XXUFNC6 firmware is compatible with Galaxy S4 LTE (GT-I9505) only. Do not attempt installing it on incorrect variants as it may brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

Downloads Required

Steps to Update Galaxy S4 LTE with Android 4.4.2 I9505XXUFNC6 KitKat Stock Firmware

Update Galaxy S4 LTE with I9505XXUFNC6 Android 4.4.2 KitKat Stock Firmware

Step 1: Extract Android 4.4.2 I9505XXUFNC6 firmware zip file via WinRAR/7-Zip or WinZip to obtain a .tar.md5 file and some other optional files.
Step 2: Next, extract the Odin zip file to get Odin3 v3.09.exe along with a few other files.
Step 3: Power off the Galaxy S4 LTE and boot the device into Download Mode. To do so, press and hold Volume Down, Home and Powerbuttons together until a construction Android robot icon with a warning triangle appears on screen. Then keep tapping Powerbutton to progress into Download Mode.
Step 5: Launch Odin on computer as an Administrator.
Step 6: Now connect Galaxy S4 to computer with USB cable in Download Mode. When Odin detects the device and a pop-up message reading "Added!" appears on screen, the ID: COM box will turn yellow with the COM port number.
Note: If the Added message fails to appear, then try re-installing USB drivers or changing the port on computer.
Step 7:In Odin, click on AP button and select the firmware file with .tar.md5 extension

Step 8: In Odin, select Auto Reboot and F. Reset Time options. But, uncheck the Re-partition option.

Step 9: After ensuring that Step 7 and Step 8 are done correctly, hit the Startbutton in Odin to begin installing the firmware.
Step 10: After the firmware is installed, a PASS message with a green background appears in the left-most box at the top of Odin. Galaxy S4 will then reboot to the Home screen. It is now safe to disconnect the USB cable and remove the phone from the computer.

Your Galaxy S4 is now running I9505XXUFNC6 Android 4.4.2 KitKat stock firmware. Head over to Settings >> About Phone to verify that the firmware is installed on the device.

Troubleshooting: If the Galaxy S4 LTE is stuck at boot animation after Step 10, then boot into recovery mode (press and hold the Volume Up, Home and Power buttons together), and perform Wipe data/Factory Reset and Wipe Cache Partition task before choosing the Reboot System Now option.

Note: In recovery mode, use Volume keys to navigate between options and Power key to select the option. Performing data wipe task will erase your device's internal memory and not external SD card data.

[Source: SamMobile]

Related